Mercedes COMAND APS ECE Update software w211/w219 v21.090 CD

126

Get real time updates directly on you device, subscribe now.

Year of release: 30 week 2006
Version: 21.090
Platform: Mercedes w211/w219 cars
System requirements: Mercedes w211/w219 car
Interface language: English + Russian
Description: The original Mercedes disk designed for updating software in the COMAND APS system for cars w211 / w219 (see photo). Contains many European languages ​​including Russian.

IMPORTANT: CD-TEXT, voice in navigation and contacts of the phone book do not become Russian, and it seems that the opportunity to get into the service menu (if you had one) and watch TV / DVD on the move is also lost

IMPORTANT2: the original Mercedes-WIS knowledge base says that after downloading this software, coding of the AGW unit is required (performed using the Star Diagnose diagnostic computer) – but I did not need

in order to download this update to COMAND APS, you must do the following

  1. Make sure the battery is not dead
  2. Make sure you have European COMAND APS
  3. Start a car
  4. remove the disk from COMAND APS (if it was there)
  5. enable COMAND APS
  6. simultaneously press three keys 1-3-8 for about 2-4 seconds – the update menu will appear (in the language that you have selected)
  7. insert disc – wait for loading
  8. will show the current version and the one you are going to upgrade to
  9. select YES
  10. Next, wait and in no case turn off the machine until the system is updated
  11. at the end of the update (approximately 20 minutes), you must
  • turn off the car
  • close it with a key
  • wait until the dashboard goes out

thanks to knowledgeable people who reported what is suitable for the following cars

Type 211 with
WDB2110041A792629
WDB2110081A990444
Type 211 with
WDB2110081A990445 by
WDB2110201A949571
Type 211 with
WDB2110201A949574 by
WDB2110221A872026
Type 211 with
WDB2110221A872046
WDB2110222A861146
Type 211 with
WDB2110221A872046
WDB2110222A861146
Type 211 with
WDB2110222A861248 by
WDB2110542A951356
Type 211 with
WDB2110542A952447 by
WDB2110891X211934
Type 211 with
WDB2110891X211942 by
WDB2112201A970590
Type 211 with
WDB2112201A970638 by
WDB2112222A855784
Type 211 with
WDB2112201A970638 by
WDB2112222A855784
Type 211 with
WDB2112222A855952
WDB2116202B000002
Type 219 with
WDD2193221A025240 by
WDD2193221A065778
Type 219 with
WDD2193221A065779 by
WDD2193222A053724
Type 219 with
WDD2193222A053782 by
WDD2193561A049607

original instructions from WIS

Use DAS version 01/2008 or later DAS version. It is imperative that you follow exactly the steps described in the DAS
work operations. It is imperative that you follow this work manual in order to avoid
damage to the COMAND system.

Connect the charger to the battery Using the charger to
battery to ensure sufficient
car battery power supply (over
12.5 V).
Turn on the ignition In the COMAND block should not
be no carriers
information.
Activate the update process Simultaneously press the combination
software keys “1”, “3” and “8”.
Insert service DVD After confirming the new version
update. software process
updates start automatically.
Turn off the ignition After successful completion
updates.
Block car locks Wait for the combination to turn off
appliances. Software update
ensure the command is successful
terminates only after a bus transition
CAN to rest mode.
Turn on the display Press any button on the display.
Press the “Display“ (“Anzeige“) key
Press the “Map” key Display settings appear
cards.
Select the setting “Arrival time /
route“ (“Ankunftzeit/Strecke“)
Connect DAS
Start programming process Menu: “AGW/Block coding
control unit AGW by pressing “F2″ control”, “Programming blocks
management”.
Run software update Select hard drive.
security by pressing “F3”
Disable DAS

Download Mercedes COMAND APS ECE Update software w211/w219 v21.090 CD

Get real time updates directly on you device, subscribe now.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More